Dane R. Marley's F-Head Pictures
Dane R. Marley is taking pictures of an F-Head while he
disassembles it. The links below are all to the individual
pictures. More coming!
Note: email me if the
images are too big. I can shrink them.
- Back View of Oil Pan
- Block Casting Numbers
- Block Cooling Drain Plug + Right Engine Mount
- Block Cooling Drain Plug Removed Next to Mounting Location
- Block Front Mounting Plate + Engine Mounts Removed from Engine
- Block Front Mounting Plate for Engine Mounts
- Block Front View without Mounting Plate
- Block Mounting Studs for Oil Sending Unit on Block
- Block Oil Channel Plug + Screw
- Block w-Water Pump Removed + Broken tube to Head
- Bottom End of Block with Cam Removed + Lifters inplace
- Bottom of Crank with Mains
- Cam + Crank Gears
- Cam in Engine + Block Oil Channel Plug + Screw
- Cam with Bolts + Plate out of Engine
- Carb Linkage + Carb off of Block pic 1
- Carb Linkage + Carb off of Block pic 2
- Carb on Block
- Crank + Oil Sump Pump
- Crank + Oil Sump Pump Back View
- Crank Removed from engine
- Crank in Engine without Pistons
- Crank with Main Bearing Caps Removed
- Distributor + Carb Air Tube Assembly
- Engine Plate - Rear
- Engine Right Side
- F-Head 134 Engine Removal from M170 Pic 4
- Fan Belt Guard off of engine
- Fan Belt Guard on Oil Pan Pic 1
- Fan Belt Guard on Oil Pan Pic 2
- Fan Belt Pulleys + 1 3-8 inch Nut Removed from Engine
- Fly Wheel Assembly + Bushing pic 1
- Fly Wheel Assembly + Bushing pic 2
- Fuel Line + Oile Line to Head off of Block
- Fuel Line Mounted on Block pic 1
- Fuel Line Mounted on Block pic 2
- Fuel Line Mounted on Block pic 3
- Fuel Lines, Oil Pump + Carb Linkage
- Fuel Pump Assembly off of Block pic 3
- Fuel Pump on Block pic 1
- Fuel Pump on Block pic 2
- Fuel Pump on Block pic 3
- Generator + Mounting Hardware Removed
- Generator Mounted Pic 1
- Generator Mounted Pic 2
- Generator Mounted Pic 3
- Generator Mounted Pic 4
- Generator Mounting Points on Block Pic 1
- Generator Mounting Points on Block Pic 2
- Generator Mounts on Block Pic 2
- Head Bolt with Broken Engine Lifting Bracket
- Head Off of Engine pic 1
- Head Off of Engine pic 2
- Intake Push Rods Tagged in Engine
- Intake Push Rods Tagged out of Engine
- Lock Screw for Oil Sump Pump Back View
- Main Bearing Caps Removed from engine
- Oil Fill Tube Attached to Engine-Head
- Oil Fill Tube Off of Engine
- Oil Filter, Lines, + Bracket off of Block
- Oil Filter, Water pump, Water Flange on Block pic 1
- Oil Filter, Water pump, Water Flange on Block pic 2
- Oil Lines, Carb Linkage + Carb on Block
- Oil Pan off of Engine
- Oil Sending Unit, Oil Lines + Water Temp Sending Unit on Block
- Oil Sending Unit, Oil Lines + Water Temp Sending Unit on Block pic 1
- Oil Sending Unit + Oil Lines off of Block
- Oil Sump Pump + Cotter Pin off of Engine
- Piston Rod Bolts with Lock Nut
- Piston Rod Bolts with Lock Nut out of Engine
- Pistons + Values in Engine
- Preasure Plate + Clutch Assy
- Preasure Plate + Clutch Assy Componets pic 1
- Preasure Plate + Clutch Assy Componets pic 2
- Rear Engine Plate + Back of Crank
- Rear Main Bearing Cap Removed
- Serial Number
- Serial Number pic 1
- Serial Number pic 2
- Serial Number pic 3
- Starter Assembly Block Mount + Bolts pic 1
- Starter Assembly Block Mount + Bolts pic 2
- Starter Assembly pic 1
- Starter Assembly pic 2
- Starter Assembly pic 3
- Timing Belt Cover + Front of Oil Pan
- Timing Case Cover
- Timing Case Cover with Bolts Removed from Engine
- Valve Cover Removed + Rocker Arm Assembly Revoved
- Valve Cover Removed Right Side View
- Valve Cover Removed Top View
- Water Pump Removed + Broken tube to Head
- Water Pump Removed + Broken tube to Headjpg
- Water pump + Hose to Head on Block
- Bottom of Block without Cam
- Bottom of Block without Cam + Lifters
- Cam + Lifters out of Engine
- Cam Shaft Gear Out of Engine
- Cam Shaft in Engine with out Gear + Oil Jet
- Damaged #4 Intake Lifter with Cam
- Exhaust Manifold Removed
- Exhaust Manifold Removed from Engine
- Left Side View of Block with Oil Plugs + Lifters Removed
- Left Side View of Block with Oil Plugs Removed Next to their Postition on Block
- Lifters Chamber Cover off of Engine
- Lifters in Engine + Left Side View of Block with Oil Plugs
- Top of Head without Lifters + Rocker Arm Removed
- Exhaust Valves removed from Engine
- Head with Valves Removed
- Intake Valves removed from Engine
- Rocker Arm Studs Removed from Head
- Top of Head with Valves Removed
Back to Military 1/4
Ton Trucks
Last modified: Thu Apr 17 20:31:12 EDT 2003